Routing Swyx Voice, several branch offices - General

Forums SwyxWare Server General Routing Swyx Voice, several branch offices

7/2/2009 5:55 PM

	spyker
309 posts

Routing Swyx Voice, several branch offices (Switzerland)

Modified By spyker on 7/2/2009 5:03:22 PM)

Hellou..

We're considering to implement Swyx at a "special" customer.. There is one headoffice, connected to a special network,
which is supported directly by a big ISP.. So, they have a 10.x.y.z-IP address on their WAN-Interface of their Router/Firewall. All the other
branch offices have such an network connectivity, just with another 10.x.y.z-address. Nothing is blocked within the network,
except what our firewalls block.

So the idea is, that we install the Swyx server at the head office and the clients at any other office.

What ports do we need to open at the branch offices firewalls, and at the head office firewall?

I don't know exactly what type of devices we'll using, but I think we're having L400/600, SwyxIts, SIP devices..

Thanks for any support!

spyker

7/3/2009 9:27 AM

	Morten Rokosz
1070 posts
www.linkedin.com/in/rokosz

Re: Routing Swyx Voice, several branch offices (Norway)

Hi spyker....

This sounds like a perfect job for our Wiki. Check out this: Which ports are used by SwyxWare?

Morten Rokosz
(Swyx T.A.G Member)

The best way to predict the future is to invent it.

8/18/2009 12:46 PM

	spyker
309 posts

Re: Routing Swyx Voice, several branch offices (Switzerland)

Hi Morten

Back from holidays straigt to this new project.. Thanks for your link for first..

I've read the wiki article, but I'm still no sure, where to open which ports. Because we have about 4 or 5 branch offices, I think it'll be too complex to open all these
ports on nearly all the firewalls.. So I think I'll go for VPN connections from every branch office, to every other branch.. So I don't have to worry about ports etc..

spyker

Page 1 of 1

Forums

SwyxWare Server

General

Routing Swyx Voice, several branch offices

Forum Policy

The discussion forums at Swyx Forum are dedicated to the discussion of Swyx, SwyxWare and related topics.

For the benefit of the community and to protect the integrity of swyx-form, please observe the following posting guidelines:

No Advertising. This includes promotion of commercial products and non-commercial products which are not directly related to SwyxWare, it's OEM versions.
No Flaming or Trolling.
No Profanity, Racism, or Prejudice.
Furthermore, make sure your posts comply to our Terms of Use.
Newest development in German law defines online forums as journalistic content, making the forum owner and all posters to journalists. With this statement the forum owner declares that neither he nor his users are journalists with all legal consequences.
The German Jugendmedienschutz-Staatsvertrag (JMStV) (Protection of Minors) defines a disclosure of online medias which are not suitable for minors below the age of 18. The Swyx Forum webseite does not provide any such content and underlies therefore not this disclosure. Please see further details including the responsible person for the protection of minors and direct contact data in the Imprint.
The forums are currently unmoderated, meaning all postings will appear immediately after submission. If this turns out not working due to massive abuse all forums will switch to moderated mode, meaning a posting must be approved after submission my a moderator before appearing.
You can use any language you like (except for the project forums) but keep in mind that by using english you will reach the largest audience.
Within the project forums english language is mandatory.