Forums :: Swyx Forum

Forums Server Configuration -... DTMF issue with Doorspeech-System

10/28/2008 12:01 PM

DTMF issue with Doorspeech-System (Switzerland)

Hi there!

We have a door speech system which is connected via a PAP2-Adapter (SIP) to our Swyx.

Now we can execute a door opener when we press a pin code within the call with this door speech system.

This works fine with our SwyxPhone L420, but if we try this with SwyxIt, the pin code isn't received correctly, and
the door is not openend..

We have the same problem, when we try to configure this system via DTMF.. this also works only with the L420.

Any suggestions?

Thanks in advance!

spyker

Page 1 of 1

The discussion forums at Swyx Forum are dedicated to the discussion of Swyx, SwyxWare and related topics.

For the benefit of the community and to protect the integrity of swyx-form, please observe the following posting guidelines:

No Advertising. This includes promotion of commercial products and non-commercial products which are not directly related to SwyxWare, it's OEM versions or a forum topic.
No Flaming or Trolling.
No Profanity, Racism, or Prejudice.
Furthermore, make sure your posts comply to our Terms of Use.
Newest development in German law defines online forums as journalistic content, making the forum owner and all posters to journalists. With this statement the forum owner declares that neither he nor his users are journalists with all legal consequences.
The forums are currently unmoderated, meaning all postings will appear immediately after submission. If this turns out not working due to massive abuse all forums will switch to moderated mode, meaning a posting must be approved after submission my a moderator before appearing.
You can use any language you like (except for the project forums) but keep in mind that by using english you will reach the largest audience.
Within the project forums english language is mandatory.